Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Thank you very much for the information and for your kindness IZ2XGIYou have two options for hardware muting of the receiver,
View attachment 11920
The first is to use pins 6 and 3 on the 9-pin connector X2 on the connection board A11. A positive voltage on pin 6 will mute the receiver. The other is to pull down pin 3 on the 25 pin connector X3 to ground potential pin 1.
There are also software muting commands that may be sent to the receiver in remote control mode,
ASCII < (hex 3C) will mute the receiver and ASCII > (hex 3E) will unmute it.